Searching recalls…
Searching…
Home › Appliances & tools › Simpson Dura-Vent Fireplace Dampers Due to…
Product recall · CPSCMarch 23, 2010Worth checking
Simpson Dura-Vent Fireplace Dampers Due to Carbon Monoxide Poisoning Hazard
Check whether yours is affected, then follow the instructions below.
What’s wrong
When the consumer attempts to open/close the damper, it can become stuck in its current position. In addition, some of the dampers were assembled backwards and are set to the closed position when the consumer attempts to open the damper. Both pose risk of carbon monoxide poisoning to the consumer.
The Recall Registry rates this worth checking — we found nothing in the notice describing a specific injury. A recall covers only the versions, UPCs or date codes it names, so check those against yours.
What it looks like
Photos help. Identifiers decide. Appearance can vary by color, finish or packaging. Confirm the model number, date code or other identifier in the official notice.
Recall image provided by CPSC
What to do
Consumers should ensure that their damper is in the open position when the fireplace is in use. Consumers or distributors with defective fireplace dampers should contact Dura-Vent to schedule a free repair. The remaining unlocated recalled dampers were distributed in Washington, California, and Colorado. Consumers and distributors whose dampers were previously inspected and repaired do not need to schedule an additional inspection.
Who to contact: For additional information, consumers can contact Simpson Dura-Vent at (866) 860-7908 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit the firm's Web site at www.duravent.com
The product
This recall involves DuraTech Anchor Plates with Dampers and DuraChimney II Anchor Plates with Dampers. The products are intended for use as a starter section for chimneys in fireplace applications. The dampers allow the chimney to be closed when the fireplace is not in use. Each damper is a short sheet metal vent pipe fitted with a circular damper plate within the vent pipe, and attached to a square anchor plate. The damper plate rotates around an axis rod to control the flow of air through the vent pipe. The damper plates have a weight attached to one side, and a chain attached to the other side. When installed in a fireplace application, the square anchor plate is generally not visible. The DuraTech Anchor Plate with Damper was manufactured in five sizes, as follows: Dura-Vent Product Description Dura-Vent Product Number 10" diameter DuraTech Damper 99142 12" diameter DuraTech Damper 99242 14" diameter DuraTech Damper 99342 16" diameter DuraTech Damper 99442 18" diameter DuraTech Damper 99542 The DuraChimney II Anchor Plate with Damper was manufactured in four sizes, as follows: Dura-Vent Product Description Dura-Vent Product Number 10" diameter DuraChimney Damper 10DCA-APD 12" diameter DuraChimney Damper 12DCA-APD 14" diameter DuraChimney Damper 14DCA-APD 16" diameter DuraChimney Damper 16DCA-APD
Details
- Units affected
- About 500
- Recall date
- March 23, 2010
- Brand
- Simpson Dura-Vent Company Inc., of Vacaville, Calif.
- Injuries reported
- None reported
Dura-Vent distributors to fireplace/chimney contractors and by installers to home builders nationwide from January 2007 through May 2008 for between $100 to $150, depending on the model and size.
The official notice
This recall was issued by the U.S. Consumer Product Safety Commission. The Recall Registry summarises it — always confirm the details at the source.
Their exact wording: “Simpson Dura-Vent Recalls Fireplace Dampers Due to Carbon Monoxide Poisoning Hazard”
Worried about the other things in your house? You can write down what you have and be told if one is recalled — or, if you sell second-hand, check your whole stock at once.
Filed under: Appliances & tools