Searching recalls…
Searching…
Home › Everything else › Lutron Power Interfaces for LED Tape Lights Due…
Product recall · CPSCJune 5, 2025Worth checking
Lutron Power Interfaces for LED Tape Lights Due to Shock Hazard
The notice says to stop using it — see below for what to do.
What’s wrong
The power interface can fail during a significant power surge (e.g., lightning strike), posing a shock hazard to consumers if they touch the LED tape lights.
The Recall Registry rates this worth checking — we found nothing in the notice describing a specific injury. A recall covers only the versions, UPCs or date codes it names, so check those against yours.
What it looks like
Photos help. Identifiers decide. Appearance can vary by color, finish or packaging. Confirm the model number, date code or other identifier in the official notice.
Recall image provided by CPSC
What to do
Consumers should immediately stop using the recalled power interfaces and any connected lighting and turn off the power at the circuit breaker. Consumers should contact Lutron for instructions on how to receive their free replacement power interface and how it will be installed at no charge. Consumers should go to https://residential.lutron.com/us/en/safety/safety-recall to determine if their unit is included in this recall and, if so, to register to receive installation of the replacement power interface. If a unit is included, Lutron will provide the free replacement power interface and a pre-paid mailing label that the consumer can use to return the unit to Lutron.
Who to contact: Lutron toll-free at 800-239-0495 from 8 a.m. to 5:30 p.m. ET Monday through Friday, by email at productrecall@lutron.com, or online at https://residential.lutron.com/us/en/safety/safety-recall or https://www.lutron.com/us/en and click on "Safety Notices" at the bottom of the page for more information.
The product
This recall involves Lutron-branded power interfaces, model LU-PH3-B, intended for use with LED tape lights. The 96W hard-wired power interfaces were distributed alone and as part of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN).
Details
- Units affected
- About 1,944
- Recall date
- June 5, 2025
- Made or distributed by
- Lutron Electronics Co. Inc., of Coopersburg, Pennsylvania
- Injuries reported
- None reported
LU-PH3-B
Dealers and distributors of audiovisual (AV) equipment and electrical supplies nationwide from September 2024 through April 2025 for about $300 for the power interfaces, and between $1,250 and $1,400 for the Lumaris LEDtape light starter kits and the HomeWorks systems.
The official notice
This recall was issued by the U.S. Consumer Product Safety Commission. The Recall Registry summarises it — always confirm the details at the source.
Their exact wording: “Lutron Recalls Power Interfaces for LED Tape Lights Due to Shock Hazard”
Worried about the other things in your house? You can write down what you have and be told if one is recalled — or, if you sell second-hand, check your whole stock at once.
Filed under: Everything else