Searching…
Searching…
Home › Sleep & nursery › CPSC Announces Recall to Repair Child Craft…
Check whether yours is affected, then follow the instructions below.
The cribs' stationary side can be assembled upside-down but still appear to be assembled correctly. If assembled upside-down, the crib side contains a hazardous five-inch gap at the top of the crib. Infants or toddlers can become entrapped in this gap (as depicted in the photo), which can lead to entrapment, strangulation or other injuries.
The Recall Registry rates this highest risk — Strangulation risk.
Photos help. Identifiers decide. Appearance can vary by color, finish or packaging. Confirm the model number, date code or other identifier in the official notice.

Recall image provided by CPSC



The CPSC staff urges parents and caregivers to examine these cribs immediately and determine whether they have been assembled properly. The best way to do this is to measure the gap between the front and back sides of the crib and the dowel that runs parallel to the sides. The gap should be no more than two and three eighths inches (2 3/8"), as shown in the images. If the gap is greater than 2 3/8", the side has been installed upside-down and needs to be re-assembled. Another indicator that the side has been installed improperly is the appearance of the barrel nut, as is visible in the image showing an incorrect assembly. The barrel nut should be at the bottom of the side, not the top. If either of these conditions are present, the side of the crib has been installed upside-down and needs to be re-assembled so that the barrel nut is not visible from the top and the gap between the dowel and the side is no greater than two and three eighths inches (2 3/8"). Consumers with these cribs should contact Foundations Worldwide, Inc., to obtain instructions and decals to affix to the stationary sides of the crib to ensure proper assembly in the future.
Who to contact: For additional information, contact Foundations Worldwide toll-free at (866) 614-0557 anytime, or visit the firm's website at www.cribsafetyinfo.com
All Child Craft brand cribs with the foot top dowel (as shown in the photos) including, but not limited to, the following model: Name: Child Craft convertible cribs Model Number F36101. The name "Child Craft" appears on a label on the crib's frame and identifies the place of manufacture as Salem, Indiana or New Salisbury, Indiana. These cribs were manufactured by Child Craft Industries, Inc., which is no longer in business.
Babies 'R Us and other stores nationwide between January 1998 and June 2009 for between $600 and $650.
This recall was issued by the U.S. Consumer Product Safety Commission. The Recall Registry summarises it — always confirm the details at the source.
Their exact wording: “CPSC Announces Recall to Repair Child Craft Brand Stationary-Side Cribs with Dowel Due to Entrapment and Strangulation Hazards”
Worried about the other things in your house? You can write down what you have and be told if one is recalled — or, if you sell second-hand, check your whole stock at once.
Filed under: Sleep & nursery
The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between…